AIYIMA A70

Sale price$199.004.6

Style: With US 48v5a Power Supply

AIYIMA's latest TPA3255 power amplifier has PFFB function and is equipped with 48v5a GAN power supply. 

Parameter:
Chipset: TPA3255+NE5532
Replaceable operational amplifier chips: RT3609SM, OPA2604, OPA2134, LM4562, JRC5532, OP275GSZ, OPA1612, MUSES01/02/03, etc.
Distortion:0.0015%(@1W)
Signal-to-noise ratio:≥≥116 dB
Frequency response: 20Hz-20KHz (±1DB)
XLR input sensitivity: 3.8Vrms (19dB)
RCA input sensitivity: 1.9Vrms (25 DB)/1.1Vrms (28.5 DB)
Speaker impedance: 4-8Ω
Stereo maximum output power: 2x300 W (@4Ω) 48V10A
Input mode: RCA+XLR
Trigger: 12v Tigger input
Sub Out: 20Hz~150Hz/600Hz(-3dB) (adjustable output cutoff frequency)
Supported equipment: decoders, preamplifiers, computers, CDs, mobile phones, MP3, etc.
Output mode: 2.0 passive speaker+Sub
Working power supply (DC): 36-48V
Packaging size (length*width*height): 146mm*79mm*90mm

A70 front panel

A70 rear panel

SINADSNR
Amplifier Frequency ResponseBass output frequency response   Bass output level

Amplifier output distortion scan – 4R/36V/48V

THD+NAmplifier output distortion scan – 8R/36V/48VAmplifier output distortion scan – 8R36V48Vcable connect

Customer Reviews

Based on 7 reviews
71%
(5)
14%
(1)
14%
(1)
0%
(0)
0%
(0)
M
Matt Emburgh
Excellent Quality!

I have this set up to run my front tower speakers connected to my AV receiver. Makes them sound much clearer than my high end Denon. Very good low's, mid's and high's!!! Plenty of power. Highly recommend!

s
stefano
Great sound, but beware of the 10A PSU

The standard unit out of the box exhibits zero noise in the background, especially with the XLR input. When I plug in the upgraded 10A PSU, there is a whooshing sound that appears, and it is very noticeable. I traced it down to a large amount of ground current in the AC ground line, due to either a fault within the unit, or bad design. If you disconnect the ground pin, the noise goes away ! I am not sure it is the safe thing to do, and am thinking of ways to preserve the ground for faults, while filtering out the noise, but I have no time for that now.

A
Andreas Schwarz
Good sound but….

The sound is very good, bud i have problems by using my phono input with my streaming preamp. (Wiim Ultra) i hear a hiss (different sound with missing ground). With my old power amp „Rotel RB-06“ no problems. I switch all the cables. I can not remove the problem with the A70. My guess is the Aiyima 10A/48V power supply unit is scattering a noise in to the phono signal.

J
Johan Erik Akerblad
Compact and very good sound!

Both RCA and XLR inputs and plenty of power. According to tests I seen it delivers 90W in 8ohm*2 with good PSU. Used a MeanWell 90W AC/DC adapter because of their very high quality and Safety approvals.

D
David Bond
A70

Good amp, paired it with a wiim pro plus